DiamondCoat ®

Hard Epoxy Clear Top Coat System

This product is a 50-50 mix of a high performance water-based epoxy and a hardener base, which when combined, provide an amazingly hard clear finish for use in many and varied applications including the sealing of a variety of floor surfaces.

These include materials such as most types of timber, tiles (unglazed in particular), concrete, Medium Density Fibreboard, and many others besides. For very light surfaces (e.g. white or bleached pine), a slight colour change may be seen, but for all other surfaces there is no noticeable effect. The finish can be recoated at any time in the future.

Being an epoxy, DiamondCoat is expected to offer a moderate chemical resistance to a range of household materials and solvents.

Special Features:

• Since DiamondCoat is “acrylic” in nature, the films produced are not prone to cracking, chipping, or peeling.

• Good resistance to hydrostatic pressure

• Excellent adhesion promotion

• Superior resistance to dirt pick-up

• Water clean up

• No expensive and highly dangerous solvents

• Non-Flammable

• Recoatability at any time

• Exhibits an extremely hard, almost scratch proof finish.

DiamondCoat .pdf resources

DiamondCoat Product Data Sheet

For more information visit:www.phoenixpaints.com/m_04_08_2.html

To view .pdf you must have Adobe Acrobat Reader Download for free

(03) 688-2160 kemtek@ihug.co.nz www.kemtek.co.nz